0.    INTRODUCTION

       This specification provides the definition of the Cargo/goods
       handling and movement message (HANMOV) to be used in Electronic
       Data Interchange (EDI) between trading partners involved in
       administration, commerce and transport.

1.    SCOPE

1.1   Functional Definition

       A message from a party to a warehouse/distribution center
       identifying the handling services and where required the
       movement of specified goods, limited to warehouses within the
       jurisdiction of the distribution centre.

1.2   Field of Application

       The Cargo/goods handling and movement message may be used for
       both national and international trade. It is based on universal
       commercial practice and is not dependent on the type of
       business or industry.

1.3   Principles

       This message addresses the indirect flow of goods between
       seller and buyer through a warehouse/distribution center.
       
       The functions of this message are limited to: 
       
       - assembly/disassembly of goods and products, without
       interfering in the manufacturing process 
       - (re-)packing/unpacking
       - control of goods associated with the handling services but
       not interfering in the manufacturing process
       - marking and labeling on the packages of the goods but does
       not extend to the marking and labeling of the products 
       - movement of goods limited between warehouses within the
       jurisdiction of the distribution center 
       - preparation of goods for shipment
       - storage 
       - clearance
       - goods inspection
       - hazardous material handling 
       
       The movement of specified goods relates here to the area where
       control of the goods is to be exercised from the arrival of the
       goods to the distribution center until the departure of the
       goods from the distribution center to another party. It can
       include movements between warehouses within the jurisdiction of
       the distribution center. Other movements of goods will be given
       by the relevant instruction messages, i.e. IFTMIN (Instruction
       message)and Instruction For Despatch (message under
       development).
       
       The functions Assembly/Disassembly are meant to make the goods
       ready for delivery to the final customer, they are not part of
       the actual manufacturing or assembly process.
       
       - Goods items may or may not be containerized.
       - A goods item may be in one or pieces of equipment, and a
       single equipment may contain one or more goods items.
       - One goods item and/or line item may be related to one or more
       customs tariff codes.
       - Goods items may reflect either the contractual or operational
       description of the goods.
       - Equipment may have other types of equipment attached to it,
       e.g. a temperature control unit attached to a container.
       - Equipment and/or goods items may be attached to another load
       or transport device, which as such may be attached to yet
       another load or transport device, e.g. a container on a chassis
       on a railway wagon.
       - Transport devices, which have the ability of powered movement
       on their own, are specified in the transport details group.
       Other load or transport devices are specified as equipment.
       - The expression of packaging for goods items in the GID
       segment can be expressed at up to three levels.
       
       A number of generic transport terms are described in the Annex
       (glossary of terms).

2.    REFERENCES

       See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
       Section 1.

3.    TERMS AND DEFINITIONS

       See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction,
       Section 2.

4.    MESSAGE DEFINITION

4.1   Data Segment Clarification

       This section should be read in conjunction with the Branching
       Diagram and the Segment Table which indicate mandatory,
       conditional and repeating requirements.

0010 | UNH, Message header
       A service segment starting and uniquely identifying a message.
       The message type code for the Cargo/goods handling and movement
       message is HANMOV.
       
       Note: Cargo/goods handling and movement messages conforming to
       this document must contain the following data in segment UNH,
       composite S009:

       Data element  0065 HANMOV
                     0052 D
                     0054 95B
                     0051 UN

0020   BGM, Beginning of message
       A segment to indicate the beginning of the message by
       identifying the message by a document/message number.

0030   DTM, Date/time/period
       A segment to indicate date(s), time(s) and periods relating to
       the whole message, e.g. document/message date.

0040   HAN, Handling instructions
       A segment providing information on general handling
       instructions applicable to all data in the message, e.g.
       assembly and/or preparation of goods for shipment.

0050   FTX, Free text
       A segment to specify free form or processable supplementary
       information. In computer-to-computer exchanges free form text
       will normally require the receiver to process this segment
       manually.

0060   CNT, Control total
       A segment to specify control totals.


0070   Segment group 1: TCC-LOC-FTX-CUX
       A group of segments to specify charges associated with the
       handling.

0080      TCC, Transport charge/rate calculations
          A segment to specify a charge.

0090      LOC, Place/location identification
          A segment to indicate a location where the chargeable action
          is (to be) performed.

0100      FTX, Free text
          A segment to specify processable supplementary information
          associated with charge.

0110      CUX, Currencies
          A segment to specify currencies associated with charge.


0120   Segment group 2: RFF-DTM
       A group of segments containing references and constants which
       apply to the entire message.

0130      RFF, Reference
          A segment to express a reference which applies to the entire
          message such as: the document/message number that is to be
          updated by this very message (according to data element 1225
          - Message function, coded in segment BGM).

0140      DTM, Date/time/period
          A segment to indicate date and time relating to the
          reference.


0150   Segment group 3: NAD-LOC-DOC-SG4-SG5
       A group of segments to identify a party, related references,
       locations, contacts and required documents.

0160      NAD, Name and address
          A segment to identify the party's name, address and
          function, e.g. warehouse/distribution centre.

0170      LOC, Place/location identification
          A segment to indicate a location where a specific function
          will be performed.

0180      DOC, Document/message details
          A segment to identify a document required of, by or for the
          party.


0190      Segment group 4: RFF-DTM
          A group of segments to specify a reference related to the
          party.

0200         RFF, Reference
             A segment to identify a reference used by a party.

0210         DTM, Date/time/period
             A segment to indicate date and time relating to the
             reference.


0220      Segment group 5: CTA-COM
          A group of segments identifying a contact and its
          communications related to the party.

0230         CTA, Contact information
             A segment to identify a person or department within the
             party.

0240         COM, Communication contact
             A segment to identify a communication number of a person
             or department to whom communication should be directed.


0250   Segment group 6: TDT-DTM-LOC-RFF
       A group of segments to indicate details of the movement of
       goods such as mode and means of transport, locations,
       departure, and arrival date(s) and time(s).

0260      TDT, Details of transport
          A segment to indicate information related to a certain stage
          of the transport, such as mode, means and carrier.

0270      DTM, Date/time/period
          A segment to indicate date and time relevant to the
          transport details, e.g. departure date/time.

0280      LOC, Place/location identification
          A segment to indicate a location such as transport origin,
          destination, stop-off, etc.

0290      RFF, Reference
          A segment to specify an additional reference related to the
          stage of the transport.


0300   Segment group 7: LIN-PIA-IMD-HAN-TCC-SG8-MEA-QTY-GIN-GIR-DTM-
                         FTX-SG10-LOC-SG11
       A group of segments providing details of the individually
       handled product items.

0310      LIN, Line item
          A segment identifying the product item being handled or the
          resulting product code after assembly or disassembly.

0320      PIA, Additional product id
          A segment providing additional product identification, e.g.
          EAN number.

0330      IMD, Item description
          A segment to describe the product being handled. This
          segment should be used for products that cannot be
          identified by a product code or article number.

0340      HAN, Handling instructions
          A segment to specify handling instructions specific to the
          product item in addition to and not overriding the handling
          instructions on message level.

0350      TCC, Transport charge/rate calculations
          A segment to specify a charge associated with the product
          item, e.g. assembly charge.


0360      Segment group 8: NAD-SG9
          A group of segments for identifying names and addresses and
          their functions.

0370         NAD, Name and address
             A segment to identify the party's name, address and
             function, e.g. seller, buyer, inspecting party. It is
             recommended that where possible only the coded form of
             the party identification should be specified, e.g. when
             the buyer and seller are known to each other.


0380         Segment group 9: CTA-COM
             A group of segments identifying a contact and its
             communications related to the party.

0390            CTA, Contact information
                A segment to identify a person or department within a
                party.

0400            COM, Communication contact
                A segment to identify a communication number of a
                person or department to whom communication should be
                directed.

0410      MEA, Measurements
          A segment identifying physical measurements of the handled
          product item in original or unpacked form.

0420      QTY, Quantity
          A segment to give quantity information concerning the
          product.

0430      GIN, Goods identity number
          A segment providing identity numbers of the goods being
          handled, e.g. serial numbers for assembled products.

0440      GIR, Related identification numbers
          A segment providing sets of related identification numbers
          for a product item, e.g. in case of assembly (disassembly)
          engine number, chassis number and transmission number for a
          vehicle.

0450      DTM, Date/time/period
          A segment providing date/time information related to the
          product item, e.g. production date.

0460      FTX, Free text
          A segment to specify free form or processable information,
          which further clarifies, when required, the product item. In
          computer-to-computer exchanges free form text will normally
          require the receiver to process this segment manually.


0470      Segment group 10:RFF-DTM
          A group of segments to give reference numbers and dates.

0480         RFF, Reference
             A segment identifying a reference related to the product
             item and/or a reference as a pointer to the goods item
             number in the GID group.

0490         DTM, Date/time/period
             A segment to specify date/time/period relating to the
             reference.

0500      LOC, Place/location identification
          A segment identifying a specific location, e.g. within the
          warehouse/distribution center.


0510      Segment group 11:PAC-MEA-QTY-SG12
          A group of segments providing details how the product item
          is packed, such as number and type of packages, physical
          measurements and quantities.

0520         PAC, Package
             A segment to describe packaging details for the product
             item.

0530         MEA, Measurements
             A segment specifying physical measurements of packages.

0540         QTY, Quantity
             A segment to specify a quantity of products per package.


0550         Segment group 12:PCI-GIN
             A group of segments identifying one specific package or a
             number of packages, their marks and numbers.

0560            PCI, Package identification
                A segment specifying marking and labels used on
                individual packages or a range of packages.

0570            GIN, Goods identity number
                A segment providing identification numbers being
                applied to the packages handled.


0580   Segment group 13:GID-HAN-CST-TMP-RNG-LOC-MOA-PIA-FTX-NAD-MEA-
                         DIM-RFF-PCI-SG14-SGP-TCC-SG15
       A group of segments to describe the goods items for which
       transport is undertaken.

0590      GID, Goods item details
          A segment to identify a goods item for which handling is
          specified. A goods item can be identified at up to three
          levels of packaging.

0600      HAN, Handling instructions
          A segment to specify handling instructions specific to the
          goods item in addition to and not overriding the handling
          instructions on message level.

0610      CST, Customs status of goods
          A segment to specify goods in terms of customs identities.

0620      TMP, Temperature
          A segment to specify a temperature setting for a goods item.

0630      RNG, Range details
          A segment to specify a temperature range setting for a goods
          item.

0640      LOC, Place/location identification
          A segment identifying a specific location, e.g. within the
          warehouse/distribution center.

0650      MOA, Monetary amount
          A segment to specify a monetary amount associated with a
          goods item, such as declared value, FOB value, etc.

0660      PIA, Additional product id
          A segment to specify article numbers, e.g. in case of
          repackaging.

0670      FTX, Free text
          A segment to specify processable supplementary information
          relating to the goods item, e.g. goods description.

0680      NAD, Name and address
          A segment to specify an address of a place of collection or
          delivery or inspecting party for a goods item.

0690      MEA, Measurements
          A segment to specify measurements, other than dimensions,
          applicable to a goods item.

0700      DIM, Dimensions
          A segment to specify dimensions applicable to a goods item.

0710      RFF, Reference
          A segment to identify a reference to a goods item.

0720      PCI, Package identification
          A segment to specify marks and numbers of a goods item.


0730      Segment group 14:DOC-DTM
          A group of segments to specify documents and associated
          date(s) and time(s) for a goods item.

0740         DOC, Document/message details
             A segment to specify a document prepared for a goods
             item.

0750         DTM, Date/time/period
             A segment to associate date and time with the prepared
             document.

0760      SGP, Split goods placement
          A segment to identify the equipment in which goods are
          loaded.

0770      TCC, Transport charge/rate calculations
          A segment to specify charge associated with the goods item.


0780      Segment group 15:DGS-FTX-MEA
          A group of segments to specify dangerous goods details
          related to the goods item. One goods item may be in
          different dangerous goods classes.

0790         DGS, Dangerous goods
             A segment to indicate the class of dangerous goods,
             packing group, etc.

0800         FTX, Free text
             A segment to specify the dangerous goods technical name
             and to specify any additional dangerous goods
             information.

0810         MEA, Measurements
             A segment to specify measurements of that portion of the
             dangerous goods in the equipment.


0820   Segment group 16:EQD-EQN-SEL-EQA
       A group of segments to specify equipment in which goods are
       loaded.

0830      EQD, Equipment details
          A segment to specify equipment and equipment size and type
          used in the transport.

0840      EQN, Number of units
          A segment to identify the number of pieces of equipment.

0850      SEL, Seal number
          A segment to identify seal and seal issuer associated with
          the equipment.

0860      EQA, Attached equipment
          A segment to identify attached or related equipment such as
          chassis attached to a container.

0870   UNT, Message trailer
       A service segment ending a message, giving the total number of
       segments in the message and the control reference number of the
       message.

4.2   Data segment index (Alphabetical sequence by tag)

          BGM Beginning of message
          CNT Control total
          COM Communication contact
          CST Customs status of goods
          CTA Contact information
          CUX Currencies
          DGS Dangerous goods
          DIM Dimensions
          DOC Document/message details
          DTM Date/time/period
          EQA Attached equipment
          EQD Equipment details
          EQN Number of units
          FTX Free text
          GID Goods item details
          GIN Goods identity number
          GIR Related identification numbers
          HAN Handling instructions
          IMD Item description
          LIN Line item
          LOC Place/location identification
          MEA Measurements
          MOA Monetary amount
          NAD Name and address
          PAC Package
          PCI Package identification
          PIA Additional product id
          QTY Quantity
          RFF Reference
          RNG Range details
          SEL Seal number
          SGP Split goods placement
          TCC Transport charge/rate calculations
          TDT Details of transport
          TMP Temperature
          UNH Message header
          UNT Message trailer

Contents of D.95B