Skip to main content

ForFITS Model - Assessing Future CO2 Emissions

The development of ForFITS was a three-year activity started in 2011 with the goal of enhancing international cooperation and planning towards sustainable transport policies, with a particular aim of facilitating climate change mitigation. The project was funded by the UN Development Agency (UNDA) and it involved all United Nations Regional Commissions (see the flyer).
The model is meant to foster sustainable transport policies For Future Inland Transport Systems (and therefore named ForFITS), and is capable of assisting users in making informed decisions about measures available for the reduction of CO2 emissions in the transport sector. Users of the tool can compare the projections between a baseline scenario and scenarios where proposed transport policies are implemented and estimate the amount of emissions that can be "saved" by their implementation in the future. Results of these analyses can be used to support the implementation of future transport policies that are likely to be effective in reducing CO2 emissions.
ForFITS model
ForFITS is primarily focused on CO2 emissions from inland transport, including road, rail and inland waterways, and predicts future emissions based on current patterns. CO2 emissions from aviation and maritime transport are also covered by ForFITS, but in a simplified manner in comparison to the other transport modes.
The model is suitable for the analysis of transport systems having a regional, national and/or local dimension, with a primary focus on national systems.
ForFITS and its user manual are freely available through the links below.
User manual

Relevant documentation, including details on the methodology behind the modelling approach; the model structure, giving information on each calculation step; the input data required, including explanations on how to use the input file; and instructions on how to perform model runs, illustrating how to visualize the results and extract them from the software application which hosts ForFITS are available in the English version of the user manual below.

For further instructions on the use of the ForFITS model and information on its characteristics, please contact UNECE directly (see the contact tab).

ForFITS - User manual
General description
A - Coverage, methodology and data requirements
B - Vensim Packaged Model (VPM) file
      Description of the views
      01 - economic parameters
      02 - demand (passenger, main drivers)
      03 - demand (passenger, non-motorized transport)
      04 - demand (passenger personal motor road)
      05 - demand (passenger personal vessels)
      06 - demand (passenger, public)
      07 - demand (passenger, air)
      08 - demand (large-freight, gdp & structure)
      09 - demand (large-freight, tkm)
      10 - demand (light road freight vehicle shares)
      11 - demand (freight)
      12 - demand (freight, travel and load by mode)
      13 - vehicles, new registrations (historical, input)
      14 - vehicles, new registrations (historical)
      15 - vehicles by age
      16 - vehicles, powertrain shares (input)
      17 - vehicle cost (input)
      18 - vehicles, powertrain choice (logit)
      19 - travel per vehicle (passenger)
      20 - travel per vehicle (freight)
      21 - travel per vehicle
      22 - travel per vehicle by age
      23 - cost of fuel
      24 - cost of vehicles
      25 - cost of crew
      26 - cost of driving
      27 - load (passenger)
      28 - load (freight)
      29 - activity, loads and stock aggregates
      30 - activity, loads and stock by age
      31 - energy consumption (historical, input)
      32 - energy consumption (historical)
      33 - energy consumption (new registrations, ratios) (region, input)
      34 - energy consumption (new registrations) (region)
      35 - energy consumption (new registrations) (area)
      36 - energy consumption by age
      37 - CO2 emissions
      38 - costs
      39 - outputs (vehicle stock)
      40 - outputs (activity)
      41 - outputs (energy use)
      42 - outputs (cost)
      43 - outputs (well-to-tank CO2 emissions)
      44 - outputs (tank-to-wheel CO2 emissions)
      45 - outputs (well-to-wheel CO2 emissions)
      46 - outputs (new registrations)
C - Excel interface
D - Using ForFITS

The pilot report builds on the application of the model to seven pilot countries: Chile, Ethiopia, France, Hungary, Montenegro, Thailand and Tunisia. The development of each pilot in terms of data gathering, definition of scenarios, model runs and analysis of the results is described in the report. The last chapter contains a set of suggestions for the definition of transport policies having implications for climate change mitigation, leveraging on the results of the pilot runs and a comparative assessment between them. 
After the completion of the first phase of the project at the end of 2013, an international consultant was engaged to evaluate its post-implementation performance.  The evaluation was conducted on the basis of a desk review of all the relevant documents and more specifically an in-depth review of the development of the ForFITS model under the project. The evaluation report summarizes the findings, conclusions and recommendations of the evaluation.

ForFITS and Environmental Performance Reviews

List of Environmental Performance Reviews

Albania (2017)

Belarus (2015)

Georgia (2016)

Tajikistan (2016)

Uzbekistan (2019)

Capacity building workshops

Awareness raising workshop
31 October 2013 - Addis Ababa, Ethiopia
Technical workshop (Ethiopia pilot case)
1-2 November 2013 - Addis Ababa, Ethiopia
Awareness raising workshop
26-27 September 2013 - Bangkok, Thailand
Technical workshop (Thailand pilot case)
23-24 September 2013 - Bangkok, Thailand
Awareness raising workshop
13 September 2013 - Geneva, Switzerland
Technical workshops (France & Montenegro pilot cases)
8-10 October 2013 - Geneva, Switzerland
19-20 November 2013 - Pogdorica, Montenegro
Pilot case of Hungary
Latin America and the Caribbeans
Awareness raising and technical workshops (Chile pilot case)
5-28 August 2013 - Santiago, Chile
West Asia
Awareness raising workshop
2-3 December 2013 - Hammamet, Tunisia
Technical workshop (Tunisia pilot case)
3-4 December 2013 - Hammamet, Tunisia

2008 The UNECE Transport Division called on the UN Development Account (UNDA) for funds to build this project together with all UN Regional Commissions
2009 The UN General Assembly endorsed the project
2010 The UN Department of Economic and Social Affairs (DESA) approved a Project Document describing in detail the major phases and activities of this three-year project

Official project launched during a video conference involving all UN Regional Commissions

2011 Preparation of a global review on existing statistical data, policy measures and assessment tools concerning CO2 emissions in transport

Development and distribution of a questionnaire (available in Arabic, English, French, German, Russian and Spanish) to provide inputs for the preparation of the review


International Expert Meeting (IEM) to disseminate information on the project, to share experiences and to explore possible synergies with other stakeholders

2012 Workshop with selected experts to gather comments on the review on statistics, mitigation polices, and modelling tools (released in a draft version in April 2012 and finalized in October 2012) and to receive feedback on a draft methodology of the ForFITS tool (released in April 2012)
2012 Model development and release of the first model prototype

Finalization of the model development

2013 Preparation of user manual and training materials
2013 Capacity-building workshops and training activities for policymakers and technical experts in all the regions associated with the UN Regional Commissions

The tasks and responsibilities of the lead entity and the other Regional Commissions have been finalized and included in specific Terms of References
Contact & links

Contact us
UNECE links
Climate Change and Transport, International Expert Meeting (24 April 2012)
Other links
IPCC, UNFCCC - Kyoto Protocol, NDC repository